Leviathan Sumps - AcrylicHabitats

The LR series comes with one to three 1-2″ slip-to-slip, schedule 40 bulk heads installed on a removable lid. The removable lid allows full access to the silencer chamber, but fully seals to prevent splashing and salt creep.
This versatile chamber is interchangable between a 4″ sock, 7″ sock, and a dispersion plate (for a filter pad) allowing any form of mechanical filtration to be used.
3. Multiple purpose chamber with a constant water level generally used for protein skimmers but can also be adapted to reactors and heaters. Because of the constant water level, the skimmer chamber also contains a dosing line holder (3.1) and an apex probe holder (3.2)).
The refugium chamber can be used to hold live rock, live sand, and macroalgae to help keep water chemistry stable. There are slots on top of the unit to accomodate small reef lights needed over the refugium (4.1).
The low profile adjustable water gate is the key to your versatile system. This system can adjust the water levels from 6″-12″ accomodating most skimmers, reactors, and heaters on the market. The gate also acts as a silencer to reduce the noise of rushing water.
The up-down configuration helps not only reduce water noise, but also diminshes bubbles resulting from any accessory devices. This 2″ chamber can also hold an extra sponge to catch any remaining organics or bubbles from entering the return chamber.
The return chamber is large enough to fit a submersible return pump and an ATO float level device. With the addition of a bulk head, an external pump can also be used.
Depending on the model, some units have a built-in automatic top off (ATO) reservior used to help automate the addition of water to your aquarium.

The Leviathan Reef System (LR) is a comprehensive refugium filtration system designed to accommodate the needs of reef keepers. These units utilize laser cut technology that integrates multiple colors of cast acrylic. The new Leviathan top includes multiple lids to reduce splashing, evaporation, and noise! All of our baffles extend the full height of the sump sealing on both the top and bottom giving the unit added strength. These innovative systems incorporate many features starting with dual inputs into a silencer chamber that overflows into a sock chamber. In most models, the sock chamber is interchangable between 4″ socks, 7″ socks, and dispersion plates (for filter pads). After the water leaves the mechanical filtration, it enters a skimmer/reactor chamber that also incorporates an apex probe holder and doser line holder. From the skimmer chamber, the water enters the refugium chamber in which their are 2 slots to accomodate a refugium light. That chamber features an adjustable water gate allowing you to control the water level from 6″-12″ to accomodate most skimmers/reactors! The water passes through a bubble trap then into the return that can accomodate an internal or external return pump.

________________________________________________________________________________________________________________

The new 2020 model has an option for no ATO with a larger skimmer chamber (14×15) with an enlarged sock chamber that will now fit the KLIR Rollermat.

Laser cut, polished edges
Clear front with engraved water level gauge
Large openings for easy cleaning
Lid to prevent splashing, evaporation, and noise
Apex Probe Holders and Dosing Line Holders
Build with 1/4″ CAST acrylic
Double welded seams
Fully extended baffles for strength
Black back & bottom to help prevent unwanted algae growth and hide debri
Multiple Colored Top
Refugium Light Holder Slots
Dual Inputs
Bulk Heads included
Interchangable sock/dispersion plate holder
Silencer Chamber
Large skimmer & refugium chambers

Leviathan Reef (LR) series is an all-inclusive, standard refugium designed to satisfy all of your reef and salt water fish desires plus some. Available in red, blue, and black top.

LR60+

LR60

LR54 Hi-flo

LR50

LR45

LR40

LR36

LR30 Slim

LR25 Hi-flo

LR24

LR15

Dimensions

60″x23″x23″ (3/8″ body)

60″x17″x20″

54″x17″x15″

50x15x15”

45x15x15”

40x15x15”

36x15x15”

30” x 9.5” x 15”

25x17x15”

24″x15″x15″

15″x15″x15″

Total Water Volume

140 gal

90 gal

60 gal

50 gals

45 gals

40 gals

35 gals

19 gal

28 gals

24 gal

15 gal

Aquarium Capacity**

450-600 gal

360-450 gal

225-300 gal

125-240 gals

90-180 gals

55-90 gals

60-115 gals

40-75 gal

30-60 gal

Input

(3) 2″ bulk head

(3) 1.5″ bulk head

(2) 1.5” bulk head

(2) 1” bulk head

(2) 1” bulk heads

(2) 1” bulk head

(1) 1″ bulk head

Silencer/Heating Chamber

8″ x 15″

6″ x 17″

6” x 15”

8” x 5”

NONE

9″ x 4″

none

Sock Holder Chamber

15″ x 15″

9″ x 15″

14″ x 17″

9” x 15”

8” x 10”

5” 9.5”

5″ x 9″

no separate chamber

Adjustable Sock Fitting

(3) 7″

(2) 7″

(3) 4″ or 7″

(2) 4” or 7”

(1) 4” or 7”

(2) 4”

(2) 4″

(1) 4″

Skimmer / Reactor Chamber

20″ x 23″

20″ x 17″

14″ x 17″

11.5” x 15”

9” x 15”

10” x 15”

9” x 9.5”

7.5″ x 17″

9″ x 15″

8″ x 15″

Refugium / Reactor Chamber

15″ x 23″

15″ x 17″

10″ x 17″ (11 gal)

8” x 15” (4-7gals)

6” – 12”

7” x 17” (8 gals)

7″ x 15″

none

Adjustable Water Level Gate

6” – 12”

*6” – 12”

6” – 12”

8” x 9.5”

*6” – 12”

6″-12″

Bubble Trap / Sponge Holder

2″ x 23″

2″ x 17″

2” x 15”

1.5” x 9.5”

1.5” x 8”

1.5″ x 15″

1″ x 6″

Return Chamber

8″ x 23″

8″ x 17″

6″ x 17″

7” x 15”

6” x 15”

6” x 9.5”

6” x 8”

6″x15″

6″x5″

ATO

none

5” x 15” (18L capacity)

none

5” x 15” (18L capacity)

none

*Does NOT affect the refugium water level, plumbing included

**Depending on bioload, maintenance, biotope, feeding, life density, ect

Specific Features for each unit:

Large capacity 450-600 gal tank

Large capacity 360-450 gal tank

New Hi-flo design*

Built-In ATO

10″ wide slim line

New Hi-flo design*

Single Input

Cube System

(3) 7″ socks

Direct Drain into socks

Plumbing Included

(1) 1″ bulk head included

Single Input

Plumbing Included

Direct Drain into 4″ sock

(1) 1″ bulk head included

Large access opening

Direct Drain into 4″ sock

Spacious Skimmer/Reactor Chamber

* New High-Flo Design: An innovative design that allows high capacity and a high flow rate in a small footprint. This dual input system allows you to divert some of the water (we recommend 20%) from one input directly to the refugium chamber on the opposite side of the chamber (plumbing and valves included). This innovation allows you to utilize the refugium chamber to its fullest capacity (2x greater). The refugium capacity is twice that of most linear sump designs. This design utilizes more input bulk heads and larger sock capacity to accomodate the higher flow rates. On average these filters can support an aquarium 50% larger than its given footprint.

The Reef Sump Series is a specialty sump designed to accommodate larger skimmers and multiple reactors . Much like the Reef Series, these units utilize laser cut technology and cast acrylic. These Leviathan Reef Sumps incorporate many features starting with dual inputs into a silencer chamber and a third input to accommodate non-tradition overflow system, such as Herbie, Bean, and Durso plumbing configuration. In most models, the sock chamber is interchangable between 4″ socks, 7″ socks, and dispersion plates (for filter pads). After the water leaves the mechanical filtration, it enters a skimmer/reactor chamber that also incorporates an apex probe holder, doser line holder, and an adjustable water gate allowing you to control the water level from 6″-12″ to accommodate most skimmers/reactors! The water passes through a bubble trap then into the return that can accommodate an internal or external return pump.

	RS40	RS30	RS30 Slim
*Dimensions*	40”x15”x15”	30”x15”x15”	30” x 9.5” x 15”
*Total Water Volume*	40 gals	30 gals	19 gal
Aquarium Capacity**	125-240 gals	75-150 gals	55-90 gals
*Input*	(3) 1.5” bulk heads	(3) 1.5” bulk heads	(2) 1” bulk heads
*Silencer/Heating Chamber*	5”x9”	5”x9”	NONE
*Mechanic Filtration/Sock Holder Chamber*	10”x9”	10”x9”	5” 9.5”
*Adjustable Sock Fitting*	(1) 4” or 7”	(1) 4” or 7”	(2) 4”
*Skimmer/Reactor Chamber*	23”x15”	13”x15”	9” x 9.5”
*Adjustable Water Level Gate*	6” – 12”	6” – 12”	6” – 12”
*Refugium/Reactor Chamber*	NONE	NONE	8” x 9.5”
*Bubble Trap / Sponge Holder*	2”x15”	2”x15”	1.5” x 9.5”
*Return*	6”x15”	6”x15”	6” x 9.5”
*ATO*	NONE	NONE	NONE

	LF60+	LF60	LF47	LF40	LF30
Dimensions	60x23x23	60x17x20	47”x17”x15”	40”x15”x15”	30”x15”x15”
Total Water Volume	140 gal	90 gal	52 gals	40 gal	30 gals
Aquarium Capacity**	450-600	300-450	180-300	90-180	60-125
Input	(3) 2″ bulk heads	(3) 1.5″ bulk heads	(2) 1.5” bulk heads	(2) 1.5” bulk heads	(2) 1.5” bulk heads
Drip Tray Dimensions	24″ x 22″ x 2″	24″ x 16″ x 2″	21”x16”x2”	17”x14”x2”	14”x14”x2”
Biomedia Capacity	24″x22″x14″ (32 gal)	24″x16″ x 14″ (23 gal)	21” x 16″ x 9″ (13 gals)	17″x14″x9″ (9 gals)	14″x14″x9″ (8 gals)
Sponge Chamber	2×22	2×16	2×16	2×14	2×14
Reactor/Skimmer Chamber	22×22	22×16	12×16	12×14	7×14
Silencer / Bubble Trap	2×22	2×16	2×16	2×14	2×14
Return	8×22	8×16	8×16	7×14	6×14
			**Depending on bioload, maintenance, biotope, feeding, life density, ect

(LR) Leviathan Refugium

This is a basic representation of our LR Series. Depending on the unit, some features may be modified or in different locations.

The new 2020 model has an option for no ATO with a larger skimmer chamber (14×15) with an enlarged sock chamber that will now fit the KLIR Rollermat.

(RS) Reef Sump

Leviathan Reef Sump (RS) series includes specialty designed sumps for aquarium enthusiasts who desire more room for skimmers/reactors. Available in black top.

(LF) Leviathan Freshwater

Contact Us